LME49724 Evaluation kit

Sean Busch

Other Parts Discussed in Thread: LME49724

There does not appear to be an EVM for the LME49724 on the TI website. Can you please point me in the direction of the correct evaluation kit or provide a recommendation on how customers should evaluate the part?

Thank you!

over 11 years ago

0 Don Dapkus over 11 years ago

TI__Guru**** 189401 points

Hi, Sean,

Sorry for the delay in getting back to you.

I think this board may work: http://www.ti.com/tool/opampevm

I assume that LME49724 has the "industry standard" op amp pin-out. Please check the d/s to confirm this before you order boards and samples.

-d2

0 Sean Busch over 11 years ago in reply to Don Dapkus

TI__Prodigy 390 points

Thank you for the suggestion, Don.

It appears that the LME49724 is only available in the SO PowerPAD (DDA) package, which does not appear to be one of the the "industry standard" op amp pin-outs compatible with the OPAMPEVM.

Do you have any additional suggestions?

0 Don Dapkus over 11 years ago in reply to Sean Busch

TI__Guru**** 189401 points

Hi, Sean,

That's a pity!

How about something like this?

-d2

Audio

Audio forum

LME49724 Evaluation kit