TPA6130A2EVM GUI

toshi-e2e

Other Parts Discussed in Thread: TPA6130A2EVM

Hi all,

I have a question about the GUI TPA6130A2EVM.
There are "Pole" key and "Fade" key at the bottom of the GUI.
How do I use these buttons?

Regards,
Toshi

over 10 years ago

0 Don Dapkus over 10 years ago

TI__Guru**** 189399 points

Hi, Toshi,

Did you try pushing them? :)

Pole --> it refreshes all the register values printed out on the screen

Fade --> if you change the gain for x dB to y dB with Fade off, it goes directly from x to y in one step. With Fade on, it steps through some intermediate steps to make the transition more smooth.

-d2

0 Don Dapkus over 10 years ago in reply to Don Dapkus

TI__Guru**** 189399 points

Hi, Toshi,

Are you using this GUI on Win7 or Win XP?

Or maybe you don't actually have the GUI running with an EVM?

-d2

0 toshi-e2e over 10 years ago in reply to Don Dapkus

Genius 4735 points

Don-san,

Thanks for your reply.
Unfortunately, I do not have an EVM.
And this is my customer's question and OS is WIN7.

Anyway thanks for your support.

Best regards,
Toshi

Audio

Audio forum

TPA6130A2EVM GUI