Problem with host-controlled MASTER on Radio and Network

Lucien Perez

Prodigy 10 points

our host-controlled SLAVE cannot pair with the host-controlled MASTER if we set on

Radio and Network:

RF Data Rate: 2 Mbps

Protocol Version: B

with audio streaming set already to SLAC

over 11 years ago

0 Kjetil over 11 years ago

TI__Mastermind 21125 points

Hi Lucien,

Did you remember to set the same RF data rate and protocol version also on the slave? Using different protocol versions or RF data rate on master and slave makes them invisible to each other.

Regards,

Kjetil

Audio

Audio forum

Problem with host-controlled MASTER on Radio and Network