Hi,
We have obtained the newer gui for TAS5754M evm, installed it.
Then, could you please tell us the function and the feature the regarding the interpolation mode1/2/3/4/7 of HybridFlows?
Best Regards,
Kato
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
We have obtained the newer gui for TAS5754M evm, installed it.
Then, could you please tell us the function and the feature the regarding the interpolation mode1/2/3/4/7 of HybridFlows?
Best Regards,
Kato
Hi, Kato-san,
We will investigate and get back with you shortly.
-d2
Hi Don-san,
Thank you for your support.
Could you please provide the comparison table if you have?
Best Regards,
Kato
Hi Kato-san,
There's no processing (BQ, DRC, etc) only manipulation of the interpolation register. Please see d/s TAS5754M.
Hi Damian-san,
Thank you for your reply.
Could you please tell me where there is mentioned regarding the interpolation mode in the data sheet of TAS5754M?
In addition, may I inform our customer of the web site since he would like to download TAS5754M gui?
Or should our customer request the purepath console on your web site?
Best Regards,
Kato
Hi, Kato-san,
In the EVM Product Folder for TAS5754M, there is a link to request access to the GUI in the Description field:
The TAS5754MDCAEVM allows evaluation of the TAS5754M I2S-input, closed-loop amplifier. It is populated with two TAS5754MDCA devices, one configured for two channel operation and one configured for mono operation. It operates from single 4.5V to 26.4V power supply.When combined with a PurePath™ Console Mother Board (PurePath-CMBEVM – must be ordered separately) and PurePath™ Console GUI (PurePathConsole – must be ordered separately) you have a complete audio evaluation system at your fingertips that allows audio inputs from a variety of sources to the TAS5754MDCAEVM, and a GUI to control the device and supporting circuitry.
NOTE: You must register to download the GUI. We strive to respond to all requests within three business days (usually the same day). However, if you don’t get a response within three business days, please post a request on e2e to let us know.
Hi Don-san,
Thank you for your advice.
I have already explained the content which you told me about to our customers and they intend to order PurePath Console.
Best Regards,
Kato