This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Please let me about 3-point below of TAS5754 & TAS5756.
-------------------------------------------------------------------------
・On the datasheet page-88~89 "section 9.2.1.2.2", please see below.
I clicked SLAU577, but not found this application note.
Please attach SLAU577-application note.
(If have other application note about Hybrid flow, please attach together.)
・Please send me about data(information) of boot up sequence.
Foe example, TAS5768's boot up sequence are attached.
2816.TAS5768 boot up sequence.pptx
・Are there any conditions of a power down sequence?
-------------------------------------------------------------------------
Best regards,
Satoshi
Satoshi-san,
SLAU577 isn't available as yet. We are still working on the content as they relate to the GUI. If you have the latest release GUI please use it as a guide until the app note is ready. Below is the link to the latest GUI:
http://cc.ext.ti.com/controlconsole/downloads/TAS5754M56MDCAEVM-2.1_rev34761-windows-installer.exe
We currently don't have a boot up sequence for TAS5754M or TAS5756M as the example you provided for TAS5768M. You're welcome use the current one you have for TAS5768M, if it's required. Our GUI HF download provides the needed register initialization and settings.
If you happen upon this thread at a later time, we have since published this document. It can be found here: www.ti.com/.../slau577. Hope this helps!