• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 403 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5760 Soft clipper setting

Atsushi Noda1
Intellectual 390 points

I have a question about soft clipper setting of TAS5760.

I want to use PVDD=24V and Output Voltage=±15Vp-p.

How should be setting Resistor to GND and Resistor to GVDD?

Best regards,

Noda