• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 239 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

4 Ohm speaker for TLV320AIC3110

Charles Thattil
Intellectual 305 points
Other Parts Discussed in Thread: TLV320AIC3110

Hi,

Is there any problem in using 4 ohm speaker with TLV320AIC3110?

Regards

Charles

  • 0
    TI__Guru 57800 points

    Hi Charles, 

    I will move this post to Audio Converters Forum. About your question, we recommend a minimum load of 8Ω for this device in the Recommended Operating Conditions section of the datasheet. If you need a codec able to drive 4Ω load, you could take a look to our TLV320AIC3100.

    Best Regards,

      -Diego Meléndez López
       Audio Applications Engineer