• State TI Thinks Resolved
  • Locked Locked
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 698 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PurePath wo EVM?

Max Makhnyk
Prodigy 155 points

PurePath FAQ says it can operate without an EVM. Mine hasn't arrived yet.

When I start PurePath Console, I get the message, "Searching for connected targets..." and it hangs.

Anyway around this?

Thanks.

  • 0
    TI__Guru 57800 points

    Hi Max,

    Can you please describe the PurePath Console version and EVM you want to use with it in order to take a better approach on this situation?

    Thanks and best Regards,

      -Diego Meléndez López
       Audio Applications Engineer

  • 0
    Prodigy 155 points
    Diego,
     
    I have the PurePath Console, V2.1.
    My EVM is the PCM3070EVM-K connected to the USB-MODEVM interface board.
     
    When I launch the PurePath Console it says it is searching for connected targets and hangs. I checked the docs and found that PurePath Console does not support this EVM but the other PurePath version does support the PCM3070EVM-K.
     
    I have successfully run the PCM3070EVM-K Control Software but it doesn’t support the MiniDSP programming. This is what I need the PurePath software to assist me with programming.
     
    Thank you.
     
    Phil
     
     
  • 0 in reply to Max Makhnyk
    TI__Guru 57800 points

    Hi Max,

    I think that the software you are looking for is Purepath Studio. In order to get it, you need to request access in http://www.ti.com/.../aicpurepath_studio. This tool allows you to program the MiniDSP of the device. If you want to get more information on MiniDSP programming, I suggest you to take a look to our PurePath Studio wiki. 

    Regards,  

      -Diego Meléndez López   
       Audio Applications Engineer

  • 0
    Prodigy 155 points
    My original request was for the Studio version. I submitted the request. Need it asap. If you can help, would be most appreciated.
     
    Thanks.
     
  • 0 in reply to Max Makhnyk
    TI__Guru 57800 points

    Hi Max,

    Thanks for the clarification, you should receive a confirmation email with instructions on how to download PurePath Studio in a few hours. 

    Regards,

      -Diego Meléndez López
       Audio Applications Engineer