Using PurePath with cc3200 + audio booster pack - "Hardware device not connected"

Amit Moran

Other Parts Discussed in Thread: CC3200, TLV320AIC3254EVM-K

Hello,

I would like to program the miniDSP on the audio booster pack of my CC3200 board. I have downloaded the PurePath program but whenever I try to download it I get "Hardware device not connected".

Should I install specific drivers?

How can I program the miniDSP?

Thanks,

Amit

over 11 years ago

0 J- over 11 years ago

TI__Mastermind 46195 points

Hi Amit,

PurePath Studio does not connect directly to the CC3200. You would need a TLV320AIC3254EVM-K or TLV320AIC3254EVM-U board.

J-

0 Amit Moran over 11 years ago in reply to J-

Prodigy 50 points

Hi J-,

Thank you for your answer.

So there is no way to program the miniDSP on the booster pack? Even without the PurePath app?

Thanks,

Amit

0 J- over 11 years ago in reply to Amit Moran

TI__Mastermind 46195 points

Amit,

The PurePath Studio app generates a header file. I think you can use that in the cc3200 (you might want to check in their forum page).

Details on how to generate header files are found on these wiki pages:

e2e.ti.com/.../2823.how-to-generate-a-header-h-file-with-pps

e2e.ti.com/.../2777.modifying-the-device-configuration-of-a-pps-process-flow

Regards,

J-

0 Amit Moran over 11 years ago in reply to J-

Prodigy 50 points

Thanks.

I will ask there and will post here what I found.

Amit

Audio

Audio forum

Using PurePath with cc3200 + audio booster pack - "Hardware device not connected"