• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 485 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

About TPA2028D1YZFEVM Evaluation Module

Nat Wong
Genius 3070 points
Other Parts Discussed in Thread: TPA2028D1

Dear Sirs

I can not get the TPA2028D1YZFEVM Evaluation Module software to install correctly on my laptop - I have also tried an XP machine (I'm using windows 7).

The install program runs fine, but when I connect the EVM, it say it has not installed the software correctly, even when I point the install program at the correct location.

TPA2028D1 install issue.docx

Any ideas?

BRS

Nat

  • 0
    TI__Guru** 111175 points

    Hi Nat,

    You need to point to the installation directory, something like C:\Program Files\Texas Instruments Inc\TPA2028D1 Interface.

    If that doesn't work then you could try with the .inf file that I will attach. Just point the update driver software to this file. Don't copy this inf file in the same folder as the installation directory.

    Best regards,

    -Ivan Salazar

    Texas Instruments

    https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/6/TIAudioI2C_5F00_1F20_5F00_8p5_5F00_Win7.inf