TPA6211A1 Single Ended ouput Configuration

Jin Kyung Han

Other Parts Discussed in Thread: TPA6211A1

Hello

I would like to know whether the TPA6211A1 can be operated as Single Ended output or Not.

I Configure TPA6211A1 for Single Ended input and Single ended Output which coupled Capacitor 22uF connected to LOAD(38 Ohm).

Is the above the concept, Single Ended Output Possible?

Let me know

over 9 years ago

0 Ivan Salazar over 9 years ago

TI__Guru** 109625 points

Hi Jin,

TPA6211A1 can be operated in SE output configuration. The special requirement is to add a coupling capacitor at the output which you have already mentioned in your post.
Some information about output configuration is at the D/S in the Differential Output Versus Single-Ended Output section (page 17)

Best regards,
-Ivan Salazar
Texas Instruments

0 Jin Kyung Han over 9 years ago in reply to Ivan Salazar

Expert 1520 points

Ivan
Your answer for my question is very useful for me.
Thanks

Audio

Audio forum

TPA6211A1 Single Ended ouput Configuration