• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 743 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV320AIC3101 EVM connect issue

Ray Hsu
Expert 1330 points

OS: Win7, Win8.1

when i connect the EVM, and open the GUI, it shows connect USB, only can retry or exit..

change to other PC is the same issue, how to fix this issue? thx!

  • 0
    TI__Guru* 84915 points

    Hi, Ray,

    I will try to guide you step-by-step in order to find the mistake.

    1. Download the TLV320AIC310xEVM GUI: http://www.ti.com/lit/zip/slac249.
    2. Then, run the setup file in order to install the GUI. If you have problems to install it, please try with the troubleshoot compatibility option.
    3. Make sure that the TLV320AIC310xEVM and the USB-MODEVM INTERFACE have all the jumpers on the default position. Please, consult the EVM User's Guide for more information.
    4. Connect the EVM to the PC.
    5. Open the computer manager in order to review if the device has been recognized or not.
    6. If not, download the NI-VISA drivers. Select the device and install the drivers.

    The device should be recognized once the GUI is opened. Could you try again with these steps, please? If the problem persists, please let me know.

    Best regards,
    Luis Fernando Rodríguez S.