TLV320AIC3104 absolute maximum rating for ADC's Analogue audio Input.

Elango C

Other Parts Discussed in Thread: TLV320AIC3104

I would like to check the absolute maximum rating for ADC's Analogue audio Input for TLV320AIC3104 as it is not mentioned in the datasheet.

If input voltage is bigger than recommended operating condition but smaller than absolute maximum rating, will it damage the codec?

over 9 years ago

0 Luis Fernando Rodriguez S. over 9 years ago

TI__Guru* 84915 points

Hi, Elango,

Welcome to E2E and thank you for your interest in our products.

Please take a look at the 8.1 Absolute Maximum Ratings of datasheet. You may find this information as Analog input voltage to AVSS.

Regarding your question about the damage on the codec, the absolute max ratings may cause a permanent damage to the device if it is exposed constantly to these values. If the voltage is between these limits, there shouldn't be any problem.

Best regards,
Luis Fernando Rodríguez S.

Audio

Audio forum

TLV320AIC3104 absolute maximum rating for ADC's Analogue audio Input.