Slew Rate of TPA6132 / 6135

JH Huang

Prodigy 150 points

Other Parts Discussed in Thread: TPA6132A2, TPA6135A2, TPA6133A2

Hi,

I didn't find the spec of slew rate in the datasheet of 6132/6135. Would you help to provide the data?

Thanks

over 9 years ago

0 Ivan Salazar over 9 years ago

TI__Guru** 108615 points

Hi JH,

I will search for this information and share it with you if it is available.

Best regards,
-Ivan Salazar
Texas Instruments

0 JH Huang over 9 years ago in reply to Ivan Salazar

Prodigy 150 points

Thanks Ivan. Looking forward to the data.

Regards

0 Ivan Salazar over 9 years ago in reply to JH Huang

TI__Guru** 108615 points

Hi JH,

Unfortunately this information is not available. This is not included in our datasheets so there are no measurements of this.
What do you want to know by slew rate? Do you want the delay time between the input and the output?
The response of the amplifier is very fast.

Best regards,
-Ivan Salazar
Texas Instruments

0 JH Huang over 9 years ago in reply to Ivan Salazar

Prodigy 150 points

Hi Ivan,

Thanks for your efforts. Based on my understanding, please correct me if it's wrong, slew rate reflects the driving capability of the amplifier. The spec of slew rate is provided in the datasheet of 6130/6133/6120. As for the features and cost, 6132 or 6135 is more suitable in our design, but we want to know more about the driving capability of these two amplifiers.

Thanks

Jianhui

0 Ivan Salazar over 9 years ago in reply to JH Huang

TI__Guru** 108615 points

Hi Jianhui,

Unfortunately this information is not available for TPA6132A2/TPA6135A2. Although I think this should be close to the TPA6133A2 spec (close to 0.4V/uS)

Best regards,
-Ivan Salazar
Texas Instruments

0 JH Huang over 9 years ago in reply to Ivan Salazar

Prodigy 150 points

Thanks Ivan. It's quite helpful.

Thanks

Jianhui

Audio

Audio forum

Slew Rate of TPA6132 / 6135