TLV320AIC3106 input Ileakage

Pol REYMOND

Intellectual 2540 points

Hi Team,

Do we have a range for current leakage for the following inputs:

MFP<0>
MFP<1>
MFP<2>
MFP<3>
GPIO1
GPIO2
SELECT

My customer would like to have it in order to choice the pull up/down resistors value for the codec configuration.

Thanks for your help.

Pol.

over 9 years ago

0 Luis Fernando Rodriguez S. over 9 years ago

TI__Guru* 84915 points

Hi, Pol,

The leakage current depends of the voltage level at those pins (IOVDD or GND). Please find the typical leakage currents below:

- If IOVDD is connected:

MFP<0> 56 nA
MFP<1> 56 nA
MFP<2> 56 nA
MFP<3> 56 nA
GPIO1 88 uA
GPIO2 88 uA
SELECT 56 nA

- If GND is connected:

MFP<0> 0 nA
MFP<1> 0 nA
MFP<2> 0 nA
MFP<3> 0 nA
GPIO1 130 uA
GPIO2 130 uA
SELECT 0 nA

Best regards,
Luis Fernando Rodríguez S.

0 Pol REYMOND over 9 years ago in reply to Luis Fernando Rodriguez S.

TI__Intellectual 2540 points

Thanks Luis for your quick answer.

Pol

Audio

Audio forum

TLV320AIC3106 input Ileakage