PCM4104EVM

ttd

Mastermind 8110 points

Other Parts Discussed in Thread: PCM4104

Dear Technical Support Team,

I have some questions about PCM4104EVM.

1) Could you show me current limitaion of supply voltage for 12V and 5V and 3.3V ?

2.) Could you show me dimensions of PCM4104EVM?

For example, 10cm(W) x 5cm(H) ?

Best Regards,

ttd

over 8 years ago

0 Luis Fernando Rodriguez S. over 8 years ago

TI__Guru* 84915 points

Hi, ttd,

Regarding your first question, the PCM4104EVM has two linear voltage regulators that supplies the EVM. Each regulator has its own current limit:

+5V regulator : Max current 950mA
+3.3V regulator: Max current 800 mA.

Regarding the EVM dimensions, my colleague will take a look at this and will answer as soon as possible.

Best regards,
Luis Fernando Rodríguez S.

0 ttd over 8 years ago in reply to Luis Fernando Rodriguez S.

Mastermind 8110 points

Hi Luis Fernando Rodríguez S,

Thank you for your reply.

I understood below.
Generally , How do these regulators consume the current during normally operation?
For example, sampling rates are maximam.

+5V regulator : Max current 950mA
+3.3V regulator: Max current 800 mA.

if you know EVM dimensions, could you please tell me these?

Best Regards,
ttd

0 Luis Fernando Rodriguez S. over 8 years ago in reply to ttd

TI__Guru* 84915 points

Hi, ttd,

My colleague will take a look at the EVM dimensions and will answer as soon as possible.

Regarding the current consumption, it may vary depending of the PCM4104 configuration. I recommend to take a look at the electrical characteristics for details:

www.ti.com/.../pcm4104.pdf

Best regards,
Luis Fernando Rodríguez S.

0 ttd over 8 years ago in reply to Luis Fernando Rodriguez S.

Mastermind 8110 points

Hi Luis Fernando Rodríguez S,

Do you have any updates about EVM dimensions?

Your cooperation will be much appriciated.

Best Regards,
ttd

0 Luis Fernando Rodriguez S. over 8 years ago in reply to ttd

TI__Guru* 84915 points

Hi, ttd,

My colleague is looking for this information and will answer as soon as possible.

Thank you for your comprehension.

Best regards,
Luis Fernando Rodríguez S.

0 ttd over 8 years ago in reply to Luis Fernando Rodriguez S.

Mastermind 8110 points

Hi Luis Fernando Rodríguez S,

Do you have any updates about EVM dimensions?

Your cooperation will be much appriciated.

Best Regards,
ttd

0 Luis Fernando Rodriguez S. over 8 years ago in reply to ttd

TI__Guru* 84915 points

Hi, ttd,

I notified my colleague about this. He will be sharing the EVM dimensions soon.

Thank you for your patience on this.

Best regards,
Luis Fernando Rodríguez S.

0 Ravi Patil over 7 years ago in reply to Luis Fernando Rodriguez S.

TI__Expert 5645 points

Dear ttd,

the dimensions of the PCM4104 EVM is as follows - 125cm (h) * 180cm(w).

Best regards,

Ravi

Audio

Audio forum

PCM4104EVM