TPA6011A4: TPA6011A4

Peter Chen(ICP_FAE)

Intellectual 2480 points

Part Number: TPA6011A4

Does the SEMAX(pin19) and SEDIFF(pin20) need tie to GND if TPA6011A4 only in BTL(bridged-tied load) mode output only?

over 7 years ago

0 Ivan Salazar over 7 years ago

TI__Guru** 101225 points

Hi Peter,

SEMAX and SEDIFF does not care if TPA6011A4 is used only in BTL mode, the DC voltage on this pins won't change the output level.

Best regards,
-Ivan Salazar
Texas Instruments

Audio

Audio forum

TPA6011A4: TPA6011A4