Hi team,
At PCM5100A spec, is there any constraint on I2S timing (rising and falling)?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
At PCM5100A spec, is there any constraint on I2S timing (rising and falling)?
Hi, Rock,
Welcome to E2E, Thanks for your interest in our products!.
There is no special rise or fall time considerations for the PCM5100A other than the typical I²S bus specs. In general for I²S bus, the maximum allowed rise/fall time is about 10% of the period of the signal.
Best Regards,
-Diego Meléndez López
Audio Applications Engineer