• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 30 subscribers
  • Views 853 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCM9211EVM-U: I2S INPUT TO SPDIF OUTPUT

Anand Selvaraj
Prodigy 30 points
Part Number: PCM9211EVM-U

Hi,

        I want to provide my I2S input to PCM9211EVM-Ukit and i need SPDIF output signal. Which port i need to give I2S input signal. I tried P4, P5, P6 but i did not get output. If any other changes i need to do for this. Please help me to solve the issue.

Thanks,

Anand.s

  • 0
    TI__Guru 57800 points

    Hi, Anand,

    Welcome to E2E, Thanks for your interest in our products!.

    In general, we recommend to use the control software for the PCM9211EVM-U to configure the device. You should be able to use any input port and then stream the output through the SPDIF output as long as the proper routing is followed in the Control Console software. 

    Best Regards,

      -Diego Meléndez López
       Audio Applications Engineer

  • 0 in reply to Diego Melendez
    Prodigy 30 points

    Hi Diego Meléndez López,

                                                    Thanks for your quick reply. I have use P6 as input port and my input range is  MCLK = 22.57MHz, BCLK = 2.82MHz, LRCLK = 44.1KHz. But i did not get proper audio output it plays rapidly like some time it play two words then no output and some audio output like that, i am not getting continuous Audio output. Could you please help me to solve the issue.

     Best Regards,

    Anand Selvaraj.