• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 440 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS2505: Efficiency curve for 8ohm load

Masatoshi Oguri
Expert 4780 points
Part Number: TAS2505

Hello,

Would you please let me see the efficiency curve for 8ohm load. That is an 8 ohm equivalent figure of Figure 13 in the datasheet.

Or if that is not available, would you please let me know how much you expect the efficiency would be higher or lower for 8ohm than that for 4ohm?

Thanks.

Oguri (TIJ automotive FAE)

 

  • 0
    TI__Guru** 109245 points
    Hi Oguri-san,

    Unfortunately this data is not available.
    You could expect a slight improvement in efficiency as higher load would demand lower current.

    Best regards,
    -Ivan Salazar
    Audio Applications Engineer - Low Power Audio & Actuators