TAS5717: Has Auto bank Switching function in TAS5717?

Vincent Hsieh

Expert 1895 points

Part Number: TAS5717
Other Parts Discussed in Thread: TAS5711

Dear Sir,

Has Auto bank Switching function in TAS5717?

over 7 years ago

0 Alex Bhandari-Young over 7 years ago

TI__Mastermind 25845 points

Hi Vincent,

I believe so, although it seems to be called clock auto-detect rather than bank switching. In the datasheet is states "The DAP can autodetect and set the internal clock-control logic to the appropriate settings for all supported clock rates as defined in the clock control register."

Is this what you are looking for? Shawn can help answer if you have any more questions.

Best,

Alex

0 Vincent Hsieh over 7 years ago in reply to Alex Bhandari-Young

Expert 1895 points

Hi Sir,

TAS5711 has auto bank switching is enabled (register 0x50, bits 2:0)

But TAS5717 I don't have find out it.

0 Shawn Zheng over 7 years ago in reply to Vincent Hsieh

TI__Mastermind 24835 points

Hi Vincent,
Yes, you are right. This feature is available on TAS5711 but NOT on TAS5717.
Best reagards,
Shawn Zheng

0 Jeff Kohnle over 7 years ago in reply to Shawn Zheng

TI__Expert 6985 points

Hello Vincent! Did this answer your question? Thanks, Jeff

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Audio

Audio forum

TAS5717: Has Auto bank Switching function in TAS5717?