• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 29 subscribers
  • Views 1777 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5751M: A question about E2PROM(24LC512) in TAS5751MEVM schematics

leo xue
Expert 1595 points
Part Number: TAS5751M
Other Parts Discussed in Thread: PUREPATH-CMBEVM, ,

Hello，

   We are using TAS5751 as PA in our intelligent speakers, The TAS5751MEVM combined with PurePath-CMBEVM(Mother Board) has been used during debugging.
Now we want to use PurePath-CMBEVM and the TAS5751 board designed by ourselves instead of TAS5751MEVM.
Then the question is there is a E2PROM(24LC512) in TAS5751MEVM,
Would you please share the E2PROM configuration  or give us some advice? So we can use TAS5751 board of our product combined with Mother Board. thanks.

  • 0
    TI__Expert 6985 points
    Hello Leo! Do you have the GUI for this device? If not please send me your email and i'll send it to you. This device can simply be configured using the I2C. If you have the EVM software you can consult the users guides that comes with it. Additionally, the software provides a GUI for configuring the device registers specific to your application. These registers can then be exported to a set of I2C commands required to configure the device, as well as read. Please let me know if you need any pointers on this please go to: Here is a link to the software: www.ti.com/.../tas5751m-tas5733l-sw
    There is also a related thread at: e2e.ti.com/.../2239044 Thanks, Jeff
  • 0 in reply to Jeff Kohnle
    Expert 1595 points
    Hi Jeff,
    Thanks for your detail information, We'll try and test again, thanks.