SRC4190: SRC4190 input sampling rate range

Stephen Chow

Part Number: SRC4190

Hi,

We are looking for suitable SRC chip which can handle a wide range of input sampling rate and the output sampling rate will be fixed at 48kHz or 96kHz. It seems that SRC4190 is a right choice, I would like to confirm that it can support the following input sampling rate or not if I fixed the RCKI at 12.288Mhz.

Input sampling rate = 8, 11.025, 12, 16, 22.05, 32, 44.1, 48, 64, 88.2, 96 kHz

Regards,

Stephen

over 7 years ago

0 Ravi Patil over 7 years ago

TI__Expert 5645 points

Hi Stephan,
Yes, the SRC4190 should be able to support the input sampling rates...Can you please clarify few more details regarding the overall system, esp. if you are going to configure the SRC device as Master or Slave? any additional details can also help...Thanks.

Best regards,
Ravi

0 Stephen Chow over 7 years ago in reply to Ravi Patil

Prodigy 70 points

Hi Ravi,

Thanks for your prompt reply.

The SRC device will be configured into slave mode for input and master for output.

Regards,
Stephen

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Audio

Audio forum

SRC4190: SRC4190 input sampling rate range