• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 28 subscribers
  • Views 1379 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCM9211: How to Convert I2S Input to Optical S/PDIF Output

Sadanori Kato
Guru 36540 points
Part Number: PCM9211

Hi,

Could you please tell me the register configuraion if converting the I2S input to the optical S/PDIF output ?

Best regards,
Kato

  • 0
    TI__Expert 5645 points

    Dear Kato-san,

    PCM9211 will be able to function in default configuration for this use case. In default state, RXIN2 is input...If you need to change the input port or sampling rate, we highly recommend using CodecControl GUI to configure the device and use the register dump from the tool to configure the device as per the application requirements.

    Best Regards,
    Ravi

  • 0 in reply to Ravi Patil
    Guru 36540 points

    Hi Ravi-san,

    Thank you for your reply.
    I understood.

    Best regards,
    Kato