Audio

Audio forum

State TI Thinks Resolved
Locked Locked
Replies 4 replies
Answers 1 answer
Subscribers 31 subscribers
Views 853 views
Users 0 members are here

Support feedback

Options

Options

Related

PUREPATH-CMBEVM: Analog Input Routing

Michael Swanson12

Intellectual 290 points

Part Number: PUREPATH-CMBEVM
Other Parts Discussed in Thread: TAS5766MRMTEVM

Hello

Is there a way to route analog input 1 on the Purepath Console Motherboard to Amplifier A on 5776 EVM & analog input 2 to Amplifier B? Currently analog input 1 on the Purepath Console Motherboard is routed to both amplifiers on 5776 EVM and analog input 2 does not make it to the output.

Let me know if any more info is needed.

Thanks

-mike

over 8 years ago

0 Jeff Kohnle over 8 years ago

TI__Expert 6985 points

Hello Mike! Which amplifier are you actually referencing... TAS5756, or another? Also, do you have the PPC tool with plug-in?

thanks, Jeff

0 Andy Liu (BMS) over 8 years ago

TI__Guru 52115 points

Hi Mike,

It might be possible. I will need to double check and get back to you.

Andy

0 Michael Swanson12 over 8 years ago in reply to Jeff Kohnle

Intellectual 290 points

Hi Jeff

I have the TAS5766MRMTEVM along with the Purepath-CMBEVM. Just posted this in the Purepath tag for thats where the analog inputs are located.

I have the PPC tool with the TAS5766 Dual, I2C Master & Learning Board apps. Do you call those plug-ins?

Thanks

-Mike

0 Jeff Kohnle over 8 years ago in reply to Michael Swanson12

TI__Expert 6985 points

Yes, these are the right tools.

Hello Andy! Do you have any feedback for Mike? Thanks, Jeff