TAS5760M: Delphi Thermal Model

Sadanori Kato

Part Number: TAS5760M
Other Parts Discussed in Thread: TAS5614LA, TAS5624A

Hi,

Our customer requests us to provide the delphi thermal model for TAS5760M, so could you please share it to us as the follwoing post ?

https://e2e.ti.com/support/amplifiers/audio_amplifiers/f/6/t/608188?tisearch=e2e-quicksearch&keymatch=tas5624a delphi

Best regards,
Kato

over 8 years ago

0 Andy Liu (BMS) over 8 years ago

TI__Guru 52115 points

Hi Kato,

I will check whether the TAS5760M thermal model is available.

Andy

0 Andy Liu (BMS) over 8 years ago in reply to Andy Liu (BMS)

TI__Guru 52115 points

Hi Kato,

I have checked with my colleagues. Unfortunately, none of the devices in our group has its delphi thermal model available.

Andy

0 Sadanori Kato over 8 years ago in reply to Andy Liu (BMS)

Guru 36540 points

Hi Andy-san,

Is that true ?
For TAS5614LA and TAS5624A, your design team made the delphi thermal model and shared it to me.
I would like to confirm just in case but is it correct that you aren't able to make it ?

Best regards,
Kato

0 Sadanori Kato over 8 years ago in reply to Sadanori Kato

Guru 36540 points

Hi Andy-san,

Could you please let me know if you have any updates ?

Best regards,
Kato

0 Andy Liu (BMS) over 8 years ago in reply to Sadanori Kato

TI__Guru 52115 points

Hi Kato,

TAS5614LA and TAS5624A belonged to the high power audio team. I can have a quick chat with them tomorrow to see how they got the thermal model done.

Andy

0 Sadanori Kato over 8 years ago in reply to Andy Liu (BMS)

Guru 36540 points

Hi Andy-san,

Thank you for your continuous support.

I am expecting you to decide to create a new delphi thermal model for TAS5760M.

Best regards,
Kato

0 Sadanori Kato over 8 years ago in reply to Sadanori Kato

Guru 36540 points

Hi Andy-san,

Please let us know the current status so that our customer will begin to design the test board soon.

Best regards,
Kato

0 Andy Liu (BMS) over 8 years ago in reply to Sadanori Kato

TI__Guru 52115 points

Hi Kato,

I have been able to find a way to request a Delphi thermal model. I will submit a request tomorrow morning and keep you posted.

Andy

0 Sadanori Kato over 8 years ago in reply to Andy Liu (BMS)

Guru 36540 points

Hi Andy-san,

Thank you for your special support.

Could you please confirm when the delphi thermal model will be completed if submitting a request tomorrow morning ?

Best regards,
Kato

0 Andy Liu (BMS) over 8 years ago in reply to Sadanori Kato

TI__Guru 52115 points

Hi Kato,

TAS5760M has two packages. Which package are you interested in? I assume it is TAS5760MDAP, correct?

Andy

0 Sadanori Kato over 8 years ago in reply to Andy Liu (BMS)

Guru 36540 points

Hi Andy-san,

Yes, you are correct, our customer will use TAS5760MDAP(HTSSOP-32).

Best regards,
Kato

0 Sadanori Kato over 8 years ago in reply to Sadanori Kato

Guru 36540 points

Hi Andy-san,

Could you please tell me when the delphi thermal model will be completed ?

Best regards,
Kato

0 Andy Liu (BMS) over 8 years ago in reply to Sadanori Kato

TI__Guru 52115 points

Hi Kato,

I have already submitted my request. However, as you may know, most of the US colleagues will be on vacations until the New Year. I will give you some update after the New Year.

Andy

0 Sadanori Kato over 8 years ago in reply to Andy Liu (BMS)

Guru 36540 points

Hi Andy-san,

Thank you for your quick response.

I understood and am looking forward to getting the information from you next year.

Best regards,
Kato

0 Andy Liu (BMS) over 8 years ago in reply to Sadanori Kato

TI__Guru 52115 points

Hi Kato,

I have sent the thermal model file to you via email.

Andy

0 Sadanori Kato over 8 years ago in reply to Andy Liu (BMS)

Guru 36540 points

Hi Andy-san,

Thank you for sending the delphi thermal model file.

Best regards,
Kato

Audio

Audio forum

TAS5760M: Delphi Thermal Model