TAS5760M: External Bypass Capacitor for Internal Linear Regulator

Hi Kato-san,
We are looking into this issue and Andy will get back to you later. Thanks for your patience.
Best regards,
Shawn Zheng

Hi Shawn-san,

Thank you for your reply.

I am looking forward to hearing from Andy-san.

Best regards,
Kato

Hi Kato,

Is there any particular reason to use 10uF caps?

The caps were determined base on the feedback from our design team. As you may see, TAS5760xxEVM and all the reference schematics in the datasheet are using the 1uF caps. Even our validation results are based on them. I would always suggest customers follow our recommendation.

Andy

Hi Andy-san,

Thank you for your response.

That reason to use 10uF caps is the convenience of our customer.
I understood your comment, however please let me know if there is a reason such as degradation of the high frequency characteristics of the capacitor.

Best regards,
Kato

Hi Andy-san,

Thank you for your comment.

I understood and will contact you if I get additional questions from our customer.

Best regards,
Kato