• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 296 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV320AIC3204: L/R channel in TDM mode

Yee Yong Teo
Expert 4335 points
Part Number: TLV320AIC3204


Hi Team,

We have a system running in TDM mode. There would be 6 channels, 32-bit word length. AIC3204 has been configured to capture data with zero offset. So, in this case, is channel #1 the left channel and channel #2 the right channel?

Thanks.

- YY

 

  • 0
    TI__Guru 57800 points

    Hi, Yee Yong,

    Correct, channel #1 corresponds to the left channel, and channel #2 is the right channel by default. This can be inverted on the DAC side of the device by configuring Page 0 Register 63.

    Best Regards,

      -Diego Meléndez López
       Audio Applications Engineer