• State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 703 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA1679: single-ended to differential ouput

Dongbao Zhou
Expert 4130 points
Part Number: OPA1679
Other Parts Discussed in Thread: TL974, RC4580

Hi team,

My customer would like to have a 4 channel op amplifier to convert a single-ended audio signal to a differential signal, the target application is the automotive head unit.

For opa1679, do you have any plan to release 125C version? From the datasheet, 85C is guaranteed.

Another option is TL974, however, its THD+N performance is higher. Do you have some other recommendations (cost sensitive application)?

Thanks.

Dongbao

  • 0
    TI__Expert 7500 points
    Hi Dongbao,
    There is not an automotive-qualified or 125°C rated OPA1679 at present. You might want to consider RC4580 as an alternative.
  • 0 in reply to Alex Davis
    TI__Expert 4130 points

    Hi Davis,

    For OPA1679, the ambient temp is 85C, what about the recommend junction temp of this device? How about TL974 in this application?

    Customer would like to SNR great than 95db in this application, could you let me know how to evaluate? Thanks.

    Dongbao

  • 0 in reply to Dongbao Zhou
    TI__Expert 7500 points
    Hi Dongbao,
    The recommended operating temperature in the datasheet refers to the conditions over which the specified performance can be expected. This characterization is typically done under quiescent conditions (i.e. minimal power dissipation in the device), so I would expect a recommended junction temperature of around 85°C to achieve specified performance.

    TL974 would be another possibility.

    SNR will depend on the customer's input signal level and configured gain for the device.
  • 0 in reply to Alex Davis
    TI__Genius 11135 points
    Dongbao

    We haven't heard back from you so we assume this answered your question. If you need additional assistance just post another reply below.

    Thanks
    Dennis