• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 395 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPA3110D2: In case of monaural output

Hirotaka Matsumoto
Guru 27585 points
Part Number: TPA3110D2

Hi all

Would you mind if we ask TPA3110D2?

<Question1>
TPA 3110D2 is not possible to use monaural output with single-ended.
Is it correct?

<Question2>
In case of monaural output with BTL, does the noise increase compared with stereo output?
If we use monaural output with BTL, what points should we take care of it?

Kind regards,

Hirotaka Matsumoto

  • 0
    TI__Mastermind 24835 points
    Hi Hirotaka-san,
    TPA3110D2 doesn't support single-ended output mode. In single-ended output mode, the output power range is only 1/4 of differential output mode. Besides, the differential mode provides better common noise supression as you know. And the most important thing is that the pop noise could be very large if TPA3110D2 is used in single-ended output mode. Please check TPA312xD2 family devices, they have the special block internally to resolve the pop noise issue and support single-ended output mode very well.
    Best regards,
    Shawn Zheng