• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 350 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5755M: TAS5755M process flow question

daisuke kawasaki
Expert 4535 points
Part Number: TAS5755M
Other Parts Discussed in Thread: , TAS5731

Hi expert,

 

My customer is looking at TAS5755M process flow in the datasheet, but it is not clear on the location of volume components listed below.

  • 0x07 Master volume 1 Description shown in subsequent section 0xFF (mute)

  • 0x08 Channel 1 vol 1 Description shown in subsequent section 0x30 (0 dB)

  • 0x09 Channel 2 vol 1 Description shown in subsequent section 0x30 (0 dB)

  • 0x0A Channel 3 vol 1 Description shown in subsequent section 0x30 (0 dB)

Do you have the complete version of process flow of the device?

Is there any detail material available on the process flow covering all DAP coeff?

 

Thank you and best regards,

Daisuke KAWASAKI  

  • 0
    TI__Guru 62870 points

    Kawasaki-San,

    Please use the GUI. The TAS5755M uses the TAS5731 GUI as linked on the TAS5755MEVM page.

    Click on CH1_volume and on the right side you will see that register 0x08 is there. The same can be done for CH2_volume, sub_volume, and MASTER volume.

    Regards,

    -Adam