WEBENCH® Tools/TAS5733L: tas5733l

jitendra rana23

Part Number: TAS5733L

Tool/software: WEBENCH® Design Tools

hi,

could u send me the links to download console purepath PPC3 application link and audio file link that will run in this applicaion

over 5 years ago

0 Shawn Zheng over 5 years ago

TI__Mastermind 24835 points

Hi jitendra,
www.ti.com/.../purepathconsole
www.ti.com/.../tas5751m-tas5733l-sw
Please read the TAS5733L EVM user's guide carefully: www.ti.com/.../slou439.pdf It includes all of these info
Best regards,
Shawn Zheng

0 jitendra rana23 over 5 years ago in reply to Shawn Zheng

Prodigy 100 points

Hi shawn,

Another problem is also in tas5733L. D-Amplifier,s PWM output from the IC pin is distorted. there is overshoot and undershoot in the waveform. although there is no distortion in sine wave after LC filter output. it is pure sine wave. i am attaching the image of distorted waveform. please tell me what is this. problems are shown in the white circle in the image.

Regards,

jitendra kumar rana

Lead engineer, samsung

0 Shawn Zheng over 5 years ago in reply to jitendra rana23

TI__Mastermind 24835 points

Hi jitendra,
This is the over-shoot on the switching edge. The parasitic inductance on the outout trace or silicon leads could cause this. You could try to add 10ohm+330pF snubber on each output pin(close to it as much as possible) to optimize this. Please find more explanation in this document: www.ti.com/.../slva255.pdf
Best regards,
Shawn Zheng

Audio

Audio forum

WEBENCH® Tools/TAS5733L: tas5733l