• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 379 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM49270: LM49270: Mono sound

Anton Kosenko
Intellectual 490 points
Part Number: LM49270

I would like to know. Can I set mono audio signal on LM49270? (on the right and left chanell at the same time)

  • 0
    TI__Guru** 102355 points
    Hi Anton,

    There is no internal signal routing/mux that can be configured for this device, so if you want to set the same output signal for both channels you would need to connect both inputs to the same source signal.

    Best regards,
    -Ivan Salazar
    Applications Engineer - Low Power Audio & Actuators