TAS5162: optimized PWM Timing

Egon Hirsch

Part Number: TAS5162

Hello all,

my customer asks what would be the optimized PWM timing for our TAS5162 to achieve lowest THD and long time stability.

My customer is using 48Vdc as power supply and 384kHz as modulation frequency. The off-time for high - and the low side FET

is in the moment 14nsec. My customer has the possibility to program the ON/OFF times very precisely.

The application is a high end active audio speaker.

Best regards

Egon

over 6 years ago

0 Adam Sidelsky over 6 years ago

TI__Guru 63250 points

Egon,

Let me ask and get back to you.

Regards,

-Adam

0 Egon Hirsch over 6 years ago in reply to Adam Sidelsky

TI__Expert 3500 points

Hi Adam,

my customer still waits for an answer.

Best regards

Egon

0 Adam Sidelsky over 6 years ago in reply to Egon Hirsch

TI__Guru 63250 points

Egon,

I have pinged the resource I asked for help. Sorry for the delay.

Regards,

-Adam

0 Adam Sidelsky over 6 years ago in reply to Adam Sidelsky

TI__Guru 63250 points

Egon,

I am told that there can be minor improvements in the THD by adjusting the inter-channel delay settings in the modulator. Thie was done by trial and error in the past.

I would suggest starting with default timing and adjusting to see how this effects the resulting THD. This will be different for every system so the calibration will be need to be done on your hardware.

Regards,

-Adam

Audio

Audio forum

TAS5162: optimized PWM Timing