TAS2559YZEVM

Mikal Dreggevik

Other Parts Discussed in Thread: TAS2559, TAS2559EVM, TAS2557, TAS2560

Several placec I find this text when I study evaluation card:

The TAS2559YZEVM and PPC3 add-in are not included and must be ordered separately.

My problem is that I can't find any information about the TAS2559YZEVM, where to order, or any datasheet.

Where can I find information about this part ?

Mikal

over 7 years ago

0 Ivan Salazar over 7 years ago

TI__Guru** 114505 points

Hi Mikail,

The mentioned board is the actual EVM:
www.ti.com/.../tas2559evm

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators

0 Mikal Dreggevik over 7 years ago in reply to Ivan Salazar

Prodigy 100 points

Hi
Are you sure about this ?
The part you list is the TAS2559 5.7-W Class-D Audio Amplifier Evaluation Module

I'm interested in the exact partnumber TAS2559YZEVM
This is used for Speaker protection evaluation

Mikal

0 Ivan Salazar over 7 years ago in reply to Mikal Dreggevik

TI__Guru** 114505 points

Mikal,

The differences between the names is just the "YZ" which is a reference to the DSBGA package.
This EVM: www.ti.com/.../tas2559evm is the evaluation board for TAS2559, which is a SmartAmp (Class-D amplifier with integrated processing for speaker protection algorithm).

If your application is mono, then you can look into TAS2557. TAS2559 is usually used in stereo applications along with TAS2560.

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators

Audio

Audio forum

TAS2559YZEVM