• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 388 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCM9211: Using ADC with 3,3V

Simon Dahl
Intellectual 375 points

Part Number: PCM9211

Hello,


Is it possible to operate the VCCAD and the complete ADC with 3.3V or does the VCCAD have to be operated with 5V?

Best regards,

Simon Dahl