TAS5825M: GPIO Feature

Sadanori Kato

Part Number: TAS5825M

Hi,

I found that TAS5825M can assign GPIO0, GPIO1 and GPIO2 as WARNZ and FAULTZ outputs in TAS5825M data sheet, so could you please tell me all features which can be assigned as WARNZ and FAULTZ outputs ?
(e.g : WARNZ = CBCW, OTW and so on / FAULTZ = OCSD, DCE, DVDD_UVLO, DVDD_OVLO, PVDD_UVLO, PVDD_OVLO, CLKE, CBC_CH1/CH2, OTSD and so on)

Best regards,
Kato

over 6 years ago

0 Shawn Zheng over 6 years ago

TI__Mastermind 24835 points

Hi Kato-san,
I'm closing this question, because it's duplicated with another one: e2e.ti.com/.../751993.
Best regards,
Shawn Zheng

0 Sadanori Kato over 6 years ago in reply to Shawn Zheng

Guru 36540 points

Hi Shawn-san,

Thank you for your support.

I cannot access above link which you would tell me, so could you please tell me what kind of flags are output from GPIO in detail ?

Best regards,
Kato

0 Sadanori Kato over 6 years ago in reply to Sadanori Kato

Guru 36540 points

Hi Shawn-san,

Sorry for rushing you, so please let me know if you have any updates.

Best regards,
Kato

0 Sadanori Kato over 6 years ago in reply to Sadanori Kato

Guru 36540 points

Hi Shawn-san,

Could you please tell me all internal status registers which are output to WARNZ and FAULTZ ?

Best regards,
Kato

0 Shawn Zheng over 6 years ago in reply to Sadanori Kato

TI__Mastermind 24835 points

Hi Kato-san,
Sorry for late reply, I'm closing this question, considering that this was already resolved in the other two posts.
e2e.ti.com/.../753966
e2e.ti.com/.../753967
Best regards,
Shawn Zheng

0 Sadanori Kato over 6 years ago in reply to Shawn Zheng

Guru 36540 points

Hi Shawn-san,

As you mentioned above, this question has already been closed.

I greatly appreciate your cooperation.

Best regards,
Kato

Audio

Audio forum

TAS5825M: GPIO Feature