• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 30 subscribers
  • Views 537 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

PCM1861EVM: PCM1861 GUI problem

PCM1861EVM: PCM1861EVM

gyuhag kim
Prodigy 30 points
Part Number: PCM1861EVM
Other Parts Discussed in Thread: PCM1861, PCM1860, PCM1865

If i have find a corruption problem of the the firmware of the USB-I2X board, how do i cope with solve ?

  • 0
    TI__Guru 57800 points

    Hi, Gyuhag,

    Welcome to E2E, thanks for your interest in our products!.

    You can follow the steps of this document to re-program the EEPROM on the USB-I2X board.

    Best Regards,

      -Diego Meléndez López
       Audio Applications Engineer

  • 0 in reply to Diego Melendez
    Prodigy 30 points

    Hi,

    Thanks for your document and kindness of re-program procedure.

    I did good job for my re-programming the EEPROM but PurPath Consol2 App program have no identify FWID.

    If you have any related of "PCM186X_v2.1_rev34705" firmware, please e-mail to me ?

    Actually, i had it try the program file(USB-AudioEVM0354_48KHZ.bin) inside the SLOC305's image folder to EEPROM  . 

    Best Regards,

    Gyuhag,Kim

  • 0 in reply to gyuhag kim
    TI__Guru 57800 points

    Hi, Gyuhag,

    The FWID is not programmable with the tools provided on the document I pointed out. FWID is used as a way to identify which EVM is connected to the GUI, but should not prevent the EVM evaluation. If you click on Connect as PCM186x, you should be able to open the PCM1861 GUI and evaluate the device.

    Best Regards,

      -Diego Meléndez López
       Audio Applications Engineer

  • 0 in reply to Diego Melendez
    Prodigy 30 points
    Hi, Diego Melendez,

    I have a lately realize usage of the PCM1860/1 does not I2C set to resister value.
    And so, i have a replacement device of PCM1860 with PCM1865.
    After all, I am now cleared all for the I2C access to resister and PCM1861 GUI's resister map viewer.

    Thanks again in your support of email.

    Best regards,

    Gyuhak,Kim
    Jiwell Electronics Co.,Ltd.