• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 239 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV632: support dipping process

Eng Lih Khaw
Expert 2000 points

Part Number: DRV632

Hi, 

Customer of mine would like to use this device for microphone input

Due to the the PCB is single sided, it has to go thru dipping process.

May i know if DRV632 support dipping? if so, could you share with me the dipping profile?

Thanks

  • 0
    TI__Guru** 113865 points
    Hi Eng,

    Unfortunately as this is not specified for this device, it is most likely that it does not support dipping process. As this is a surface mount device the IC would need to be completely covered.

    Best regards,
    -Ivan Salazar
    Applications Engineer - Low Power Audio & Actuators