• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 430 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCM5310: Output pin multiplexing

na na78
Guru 16770 points
Part Number: PCM5310


Hi

Our customer wants to change data out from DATA5 (PIN:50) to DATA1(PIN:32).

Could it be possible to do such change by register settings?

BestRegards

  • 0
    TI__Expert 5645 points

    Hi na na,

    Attached is the details of the Port 5 implementation.

    You can change the data source for Port-5 from DATA 5 to DATA1 by changing the DTS5[3:0] from 0100 (DATA5/default) to 0000 (DATA1).

    Hope this clarifies your question. Thanks.

    Best regards,
    Ravi