TAS5825M: GPIOx_SEL Register

Sadanori Kato

Part Number: TAS5825M

Hi,

According to TAS5825M data sheet, GPIO0 is off(low) if setting GPIO0_SEL[3:0] of 0x61 to 0000.
So, could you please tell me the value for the internal pull-down resistor which is connected to GPIO0 pin ?

Best regards,
Kato

over 7 years ago

0 Matthew Miao over 7 years ago

TI__Expert 6720 points

Hi Kato,

If the GPIO0 is configured to output and off (low) status, then the internal logic circuit has a ~40ohm pull-down ressistor.

Rdgs,
Matthew

0 Sadanori Kato over 7 years ago in reply to Matthew Miao

Guru 36540 points

Hi Matthew-san,

Thank you for your quick response.

I understood.

Best regards,
Kato

Audio

Audio forum

TAS5825M: GPIOx_SEL Register