TSC2102: Repeating initialization and reset

Kuramochi Tadahiko

Guru 28715 points

Part Number: TSC2102

Hi,

Does the TSC2102 allow repeating initialization and reset as below?

POWER UP　→　Initialize　→　RESET（All register clear）　→　Initialize（2nd）　→　RESET（All register clear）　→　初期化（3rd）　→　…

(It is not related to application note)

Best Regards,

Kuramochi

over 6 years ago

0 Kuramochi Tadahiko over 6 years ago

Guru 28715 points

How is this situation?

Best Regards,
Kuramochi

0 Collin Wells over 6 years ago in reply to Kuramochi Tadahiko

TI__Guru 63185 points

Kuramochi-san,

I was under the impression that we've already answered this very question two weeks ago from you in the following post:
e2e.ti.com/.../783681

Are you having specific challenges related to this question that you could share more information on?

0 Kuramochi Tadahiko over 6 years ago in reply to Collin Wells

Guru 28715 points

Collin-san,

Thank you for your reply.

Can I apply below your answer to also the TSC2102?

-------------
If you're asking whether the product can be reset more than once after it's powered on, the answer is "Yes".
You will need to initialize the device each time after reset.
-------------
Best Regards,
Kuramochi

0 Collin Wells over 6 years ago in reply to Kuramochi Tadahiko

TI__Guru 63185 points

Hello,

Yes, the answer also applies to the TSC2102.

Audio

Audio forum

TSC2102: Repeating initialization and reset