• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 29 subscribers
  • Views 585 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

PurePath console 3 "Available Apps" list only shows "I2C Master"

TAS2562YFPEVM-DC: PPC3 app for TAS2562 mono amp

Sakthiyanandan
Prodigy 110 points
Part Number: TAS2562YFPEVM-DC
Other Parts Discussed in Thread: TAS2562, , PCM1861EVM, PCM1861, PPC3-EVM-MB

Hi,

I have installed Pure path console 3 software and im not able to see any apps related to TAS2562. 

there is only a generic I2C app.
I have TAS2562YFPEVM-DC so please help me to connect this EVM to the console. Im connecting the EVM to PC through a USB-i2X board.

Please help to get TAS2562 App and PCM1861EVM

Thanks in advance,

sakthi

  • 0
    TI__Guru* 99095 points

    H Sakthi,

    You may have been granted access to PPC3 but not for TAS2562 app. Can you send me the email address you used to request access to PPC3?
    I can double check and grant you access to the app.

    In addition, do you have the PPC3-EVM-MB board? You need to mount TAS2562EVM on top of PPC3 motherboard to connect with PPC3.

    TAS2562 uses PurePath Console 3, but PCM1861 use PurePath Console 2.

    Best regards,
    -Ivan Salazar
    Applications Engineer - Low Power Audio & Actuators

  • 0 in reply to Ivan Salazar
    Prodigy 110 points

    Hi Ivan,

    sakthiyanandan.mp@vvdntech.in is my mail ID

    Please grant access to TAS2562YFPEVM-DC and PCM1861EVM.

    I dont have PPC3-EVM-MB board, Im using generic USB to I2X board.

    Thanks and regards

    sakthi

  • 0 in reply to Sakthiyanandan
    TI__Guru* 99095 points

    Sakthi,

    You have access for TAS2562 app and also to PurePath Console.

    For TAS2562, you must first install PurePath Console 3, and then download/install TAS2562 app within PPC3.

    For PCM1861, you must install PurePath Console 2, which is a different software than PPC3, but you have access already.

    If you don't have PPC3-EVM-MB, you may be able to generate a configuration for TAS2562 using PPC3, and use I2X board to write into the device registers using I2C master. But you would not be able to configure the device in real-time while connecting through USB.
    Ideally TAS2562 should be mounter on the mother board for full device evaluation.

    Best regards,
    -Ivan Salazar
    Applications Engineer - Low Power Audio & Actuators

  • 0 in reply to Ivan Salazar
    Prodigy 110 points

    thank you for the access