Hi TI Team:
When my customer debugging the DEMO board found there are some problems on the output mode Settings, They want to set a SE output mode, but when set to manual register configuration parameter is different, when 0x05 register setting, should be in accordance with the manual D2 to 1 is the SE model output, but the fact is that when the D6 and D2 both 0, the SE output port can have 2 channel output, when D6 is 0 and D2 is 1, the output SE port only 1 channel, when D6 is 1, there is no output.
Please check the attachment configuration interface, thanks!
