TPA6211A1: Gain specification

Kuramochi Tadahiko

Guru 28715 points

Part Number: TPA6211A1

Hi,

I have an additional questions regarding related thread.

・Is gain of all samples checked on ATE? or only spot sample?

・Is the resistor deciding gain trimmed? or no-trimmed?

Best Regards,

Kuramochi

over 6 years ago

0 Luis Fernando Rodriguez S. over 6 years ago

TI__Guru* 84915 points

Tadahiko-san,

Our team will take a look at this issue and will answer as soon as possible.

Thank you.

Best regards,
Luis Fernando Rodríguez S.

0 Ivan Salazar over 6 years ago

TI__Guru** 112375 points

Tadahiko-san,

I'll ask about your first question with the test team and provide an answer along with the shipped units test results.
Regarding the resistors let me check if I can confirm either of these options.

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators

0 Ivan Salazar over 6 years ago in reply to Ivan Salazar

TI__Guru** 112375 points

Tadahiko-san,

We're following up with the tests on the samples, I think we should receive the units over this week and will provide update by the end of the week.

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators

0 Ivan Salazar over 6 years ago in reply to Ivan Salazar

TI__Guru** 112375 points

Tadahiko-san,

We'll follow up on this through email.
I'm closing this thread for now.

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators

Audio

Audio forum

TPA6211A1: Gain specification