Hi team,
Could you please advised how should we deal with the unused OPAMP positive/negative input for DRV632?
Thanks.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
Could you please advised how should we deal with the unused OPAMP positive/negative input for DRV632?
Thanks.
Hi, Fery,
The DRV632 can be treated like a single operational amplifier. The positive or negative input should be connected depending of the amplifier configuration. One example is an operational amplifier in inverting input configuration as shown in figure 8 of datasheet:
https://www.ti.com/lit/ds/symlink/drv632.pdf#page=11
I hope this is clear. Please let me know if you have additional questions or comments on this.
Best regards,
Luis Fernando Rodríguez S.
Hi Luis,
If I only use 1 amplifier of DRV632, how should we deal with the other amplifier input pin? Just left floating?