Audio

Audio forum

TAS2562YFPEVM-DC: Board dimension and Connectors pin 1 location request

Jonathan Geronga

Expert 7930 points

Part Number: TAS2562YFPEVM-DC

Hi Team,

Our customer would like to request the drawing that shows the dimensions of the board and the locations of pin 1 of the two 40-pin connectors below:

The customer is designing a custom PCB that will plug into the TAS2562YFPEVM-DC that's why they need the dimension above and exact positions of the J1 and J2 connectors using the pin 1 location.

Please let me know if you have any questions.

Thanks!

Jonathan

over 5 years ago

0 Luis Fernando Rodriguez S. over 5 years ago

TI__Guru* 84915 points

Hi, Jonathan,

Our team will take a look at this thread and will answer as soon as possible.

Best regards,
Luis Fernando Rodríguez S.

0 Ivan Salazar over 5 years ago

TI__Guru** 103905 points

Hi Jonathan,

Please notice that EVMs are only evaluation modules, these are not approved to be included as is on an end product.

Regarding the required dimensions, please refer to the below.

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators

0 Jonathan Geronga over 5 years ago in reply to Ivan Salazar

TI__Expert 7930 points

Hi Ivan,

Thank you for this image with dimension and I will let the customer get informed of this information you shared.

Regards,

Jonathan