• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 454 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM4952: 64ohms capability

Kai Nomiyama
Expert 5685 points

Part Number: LM4952

Hi Audio team,

My customer is considering to use LM4952 as 64ohms headphone amp driver.
Do you have any data with 64ohms load with following condition?
> 12Vdd, 10/20% THD+N

In addition, is it ok to use LM4952 as 64ohms headphone amp?

Regards,
Kai

  • 0
    TI__Guru** 113795 points

    Hi Kai

    You can use 64 ohm loads, this should not cause issues. You should consider that increased impedance would reduce output power.
    Unfortunately there is no data available for 64 ohm loads.

    Best regards,
    -Ivan Salazar
    Applications Engineer - Low Power Audio & Actuators