This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Derek,
I'll need the following information.
1. Signal to Noise ratio : 1kHz @32dB, @6V, 7.4V & 9V
2. Power Efficiency Vs supply voltage @32dB Gain
Hi Leo,
Checked on EVM board, the a-weighting noise @32dB is 130uV. And you can calculate the SNR according to a-weighting noise and output power. Actual SNR is correlated with calculation data.
Power efficiency is related to output power, not related to gain setting. So you refer the figure 3, 7 and 11 in datasheet.
Regards,
Derek