LM4951A: Reliability Testing

Cameron Brink

Part Number: LM4951A

Hi,

What reliability testing has been done on this part? And what was the supply voltage used for reliability testing? The datasheet says the supply voltage range goes up to 9V but the graphs below are tested at 7.5V. Any and all information related to this would be helpful. We are trying to decide what supply voltage to give this part between balancing headroom and long term reliability.

Thanks,

Cameron

over 5 years ago

0 Luis Fernando Rodriguez S. over 5 years ago

TI__Guru* 84915 points

Hi, Cameron,

Welcome to E2E and thank you for your interest in our products!

Please take a look at the reliability tests that we perform with our products:

https://www.ti.com/support-quality/reliability/reliability-testing.html

While you have your device working in the recommended operating ratings, there won't be risk to damage the device and the electrical characteristics will be ensured.

Please let me know if you have additional questions or comments.

Best regards,
Luis Fernando Rodríguez S.

Audio

Audio forum

LM4951A: Reliability Testing